EEPROM:get()
来自YFRobotwiki
|
get()
描述 从EEPROM中读取任何类型的数据或者对象。
EEPROM.get(address, data)
address: 读取的位置，从0开始 (int 整型) data: 读取的数据，可以是一个基本类型（例如：float 浮点型）或者是一个自定义的结构体。
数据传递的引用
#include <EEPROM.h>
struct MyObject{
float field1;
byte field2;
char name[10];
};
void setup(){
float f = 0.00f; //Variable to store data read from EEPROM.
int eeAddress = 0; //EEPROM address to start reading from
Serial.begin( 9600 );
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}
Serial.print( "Read float from EEPROM: " );
//Get the float data from the EEPROM at position 'eeAddress'
EEPROM.get( eeAddress, f );
Serial.println( f, 3 ); //This may print 'ovf, nan' if the data inside the EEPROM is not a valid float.
// get() can be used with custom structures too.
eeAddress = sizeof(float); //Move address to the next byte after float 'f'.
MyObject customVar; //Variable to store custom object read from EEPROM.
EEPROM.get( eeAddress, customVar );
Serial.println( "Read custom object from EEPROM: " );
Serial.println( customVar.field1 );
Serial.println( customVar.field2 );
Serial.println( customVar.name );
}
void loop(){ /* Empty loop */ }
|
更多建议和问题欢迎反馈至 YFRobot论坛
