EEPROM:read()
從 YFRobotwiki
|
read()
描述 Reads a byte from the EEPROM. Locations that have never been written to have the value of 255. Syntax EEPROM.read(address) Parameters address: the location to read from, starting from 0 (int) Returns the value stored in that location (byte) Example
#include <EEPROM.h>
int a = 0;
int value;
void setup()
{
Serial.begin(9600);
}
void loop()
{
value = EEPROM.read(a);
Serial.print(a);
Serial.print("\t");
Serial.print(value);
Serial.println();
a = a + 1;
if (a == 512)
a = 0;
delay(500);
}
|
更多建議和問題歡迎反饋至 YFRobot論壇
