查看EEPROM:put()的源代码

:[[EEPROM库|EEPROM]]

{| border="0" cellpadding="20" width="100%"
|-
|width="100%" valign="top" align="left"|
<font color="olivedrab" size="+3">'''put()'''</font>



<font color="orange" size="+1">'''描述'''</font>

Write any data type or object to the EEPROM.


<font color="orange" size="+1">'''语法'''</font>

EEPROM.put(address, data)


<font color="orange" size="+1">'''参数'''</font>

address: the location to write to, starting from 0 (int)

data: the data to write, can be a primitive type (eg. float) or a custom struct


<font color="orange" size="+1">'''返回值'''</font>

A reference to the data passed in


<font color="orange" size="+1">'''注意'''</font>

This function uses [[EEPROM:update()|EEPROM.update()]] to perform the write, so does not rewrites the value if it didn't change.


<font color="orange" size="+1">'''示例'''</font>

<pre style="color:dimgray">
#include <EEPROM.h>

struct MyObject{
  float field1;
  byte field2;
  char name[10];
};

void setup(){

  Serial.begin(9600);
  while (!Serial) {
    ; // wait for serial port to connect. Needed for Leonardo only
  }

  float f = 123.456f;  //Variable to store in EEPROM.
  int eeAddress = 0;   //Location we want the data to be put.

  //One simple call, with the address first and the object second.
  EEPROM.put( eeAddress, f );

  Serial.println("Written float data type!");

  /// put() is designed for use with custom structures too.
  //Data to store.
  MyObject customVar = {
    3.14f,
    65,
    "Working!"
  };

  eeAddress += sizeof(float); //Move address to the next byte after float 'f'.

  EEPROM.put( eeAddress, customVar );
  Serial.println( "Written custom data type!") 
  Serial.println( "View the example sketch eeprom_get to see how you can retrieve the values!" );
}

void loop(){ /* Empty loop */ }

</pre>

|}

----

[[EEPROM库|返回EEPROM库]]

[[Arduino库|返回Arduino库菜单]]

[[首页|返回首页]]

更多建议和问题欢迎反馈至 [http://www.yfrobot.com YFRobot论坛]