EEPROM:get()
從 YFRobotwiki
|
get()
描述 從EEPROM中讀取任何類型的數據或者對象。
EEPROM.get(address, data)
address: 讀取的位置，從0開始 (int 整型) data: 讀取的數據，可以是一個基本類型（例如：float 浮點型）或者是一個自定義的結構體。
數據傳遞的引用
#include <EEPROM.h>
struct MyObject{
float field1;
byte field2;
char name[10];
};
void setup(){
float f = 0.00f; //Variable to store data read from EEPROM.
int eeAddress = 0; //EEPROM address to start reading from
Serial.begin( 9600 );
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}
Serial.print( "Read float from EEPROM: " );
//Get the float data from the EEPROM at position 'eeAddress'
EEPROM.get( eeAddress, f );
Serial.println( f, 3 ); //This may print 'ovf, nan' if the data inside the EEPROM is not a valid float.
// get() can be used with custom structures too.
eeAddress = sizeof(float); //Move address to the next byte after float 'f'.
MyObject customVar; //Variable to store custom object read from EEPROM.
EEPROM.get( eeAddress, customVar );
Serial.println( "Read custom object from EEPROM: " );
Serial.println( customVar.field1 );
Serial.println( customVar.field2 );
Serial.println( customVar.name );
}
void loop(){ /* Empty loop */ }
|
更多建議和問題歡迎反饋至 YFRobot論壇
