查看Cores:CDC.cpp的源代码
←
Cores:CDC.cpp
跳转至:
导航
、
搜索
因为以下原因,你没有权限编辑本页:
你刚才请求的操作只对属于该用户组的用户开放:
用户
您可以查看并复制此页面的源代码:
<font color="quartz" size ="+2"> '''CDC.cpp ''' </font> <pre style="color:royalblue"> /* Copyright (c) 2011, Peter Barrett ** ** Permission to use, copy, modify, and/or distribute this software for ** any purpose with or without fee is hereby granted, provided that the ** above copyright notice and this permission notice appear in all copies. ** ** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL ** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED ** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR ** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES ** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, ** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS ** SOFTWARE. */ #include "USBAPI.h" #include <avr/wdt.h> #if defined(USBCON) #ifdef CDC_ENABLED typedef struct { u32 dwDTERate; u8 bCharFormat; u8 bParityType; u8 bDataBits; u8 lineState; } LineInfo; static volatile LineInfo _usbLineInfo = { 57600, 0x00, 0x00, 0x00, 0x00 }; #define WEAK __attribute__ ((weak)) extern const CDCDescriptor _cdcInterface PROGMEM; const CDCDescriptor _cdcInterface = { D_IAD(0,2,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,1), // CDC communication interface D_INTERFACE(CDC_ACM_INTERFACE,1,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,0), D_CDCCS(CDC_HEADER,0x10,0x01), // Header (1.10 bcd) D_CDCCS(CDC_CALL_MANAGEMENT,1,1), // Device handles call management (not) D_CDCCS4(CDC_ABSTRACT_CONTROL_MANAGEMENT,6), // SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported D_CDCCS(CDC_UNION,CDC_ACM_INTERFACE,CDC_DATA_INTERFACE), // Communication interface is master, data interface is slave 0 D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_ACM),USB_ENDPOINT_TYPE_INTERRUPT,0x10,0x40), // CDC data interface D_INTERFACE(CDC_DATA_INTERFACE,2,CDC_DATA_INTERFACE_CLASS,0,0), D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,0x40,0), D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,0x40,0) }; int WEAK CDC_GetInterface(u8* interfaceNum) { interfaceNum[0] += 2; // uses 2 return USB_SendControl(TRANSFER_PGM,&_cdcInterface,sizeof(_cdcInterface)); } bool WEAK CDC_Setup(Setup& setup) { u8 r = setup.bRequest; u8 requestType = setup.bmRequestType; if (REQUEST_DEVICETOHOST_CLASS_INTERFACE == requestType) { if (CDC_GET_LINE_CODING == r) { USB_SendControl(0,(void*)&_usbLineInfo,7); return true; } } if (REQUEST_HOSTTODEVICE_CLASS_INTERFACE == requestType) { if (CDC_SET_LINE_CODING == r) { USB_RecvControl((void*)&_usbLineInfo,7); } if (CDC_SET_CONTROL_LINE_STATE == r) { _usbLineInfo.lineState = setup.wValueL; } if (CDC_SET_LINE_CODING == r || CDC_SET_CONTROL_LINE_STATE == r) { // auto-reset into the bootloader is triggered when the port, already // open at 1200 bps, is closed. this is the signal to start the watchdog // with a relatively long period so it can finish housekeeping tasks // like servicing endpoints before the sketch ends // We check DTR state to determine if host port is open (bit 0 of lineState). if (1200 == _usbLineInfo.dwDTERate && (_usbLineInfo.lineState & 0x01) == 0) { *(uint16_t *)0x0800 = 0x7777; wdt_enable(WDTO_120MS); } else { // Most OSs do some intermediate steps when configuring ports and DTR can // twiggle more than once before stabilizing. // To avoid spurious resets we set the watchdog to 250ms and eventually // cancel if DTR goes back high. wdt_disable(); wdt_reset(); *(uint16_t *)0x0800 = 0x0; } } return true; } return false; } void Serial_::begin(unsigned long /* baud_count */) { peek_buffer = -1; } void Serial_::begin(unsigned long /* baud_count */, byte /* config */) { peek_buffer = -1; } void Serial_::end(void) { } int Serial_::available(void) { if (peek_buffer >= 0) { return 1 + USB_Available(CDC_RX); } return USB_Available(CDC_RX); } int Serial_::peek(void) { if (peek_buffer < 0) peek_buffer = USB_Recv(CDC_RX); return peek_buffer; } int Serial_::read(void) { if (peek_buffer >= 0) { int c = peek_buffer; peek_buffer = -1; return c; } return USB_Recv(CDC_RX); } void Serial_::flush(void) { USB_Flush(CDC_TX); } size_t Serial_::write(uint8_t c) { return write(&c, 1); } size_t Serial_::write(const uint8_t *buffer, size_t size) { /* only try to send bytes if the high-level CDC connection itself is open (not just the pipe) - the OS should set lineState when the port is opened and clear lineState when the port is closed. bytes sent before the user opens the connection or after the connection is closed are lost - just like with a UART. */ // TODO - ZE - check behavior on different OSes and test what happens if an // open connection isn't broken cleanly (cable is yanked out, host dies // or locks up, or host virtual serial port hangs) if (_usbLineInfo.lineState > 0) { int r = USB_Send(CDC_TX,buffer,size); if (r > 0) { return r; } else { setWriteError(); return 0; } } setWriteError(); return 0; } // This operator is a convenient way for a sketch to check whether the // port has actually been configured and opened by the host (as opposed // to just being connected to the host). It can be used, for example, in // setup() before printing to ensure that an application on the host is // actually ready to receive and display the data. // We add a short delay before returning to fix a bug observed by Federico // where the port is configured (lineState != 0) but not quite opened. Serial_::operator bool() { bool result = false; if (_usbLineInfo.lineState > 0) result = true; delay(10); return result; } Serial_ Serial; #endif #endif /* if defined(USBCON) */ </pre> ------ [[Arduino核心代码|返回核心代码首页]] 更多建议和问题欢迎反馈至 [http://www.yfrobot.com YFRobot论坛]
返回
Cores:CDC.cpp
。
导航菜单
个人工具
登录
名字空间
页面
讨论
不转换
变种
不转换
简体
繁體
大陆简体
香港繁體
澳門繁體
大马简体
新加坡简体
台灣正體
查看
阅读
查看源代码
查看历史
操作
搜索
导航
首页
YF-论坛提问
YFRobot-直营店
YFRobot-企业店
Arduino
Arduino之入门篇
Arduino入门教程
Arduino语法参考
Arduino库
Arduino核心代码
编程平台
Mixly库
Mind+库
MakeCode扩展
传感器系列
积木式传感器系列
黑板传感器系列
蓝板传感器系列
Micro:Bit
Micro:Bit 通用基础教程
Valon智能车
Valon-I
帮助
帮助
wiki语法参考
工具箱
链入页面
相关更改
特殊页面
页面信息