SD.begin()

從 YFRobotwiki
在2015年7月23日 (四) 23:12由Admin對話 | 貢獻所做的修訂版本

(差異) ←上個修訂 | 最新修訂 (差異) | 下一修訂→ (差異)
跳到: 導覽搜尋
SD


begin()


描述

Initializes the SD library and card. This begins use of the SPI bus (digital pins 11, 12, and 13 on most Arduino boards; 50, 51, and 52 on the Mega) and the chip select pin, which defaults to the hardware SS pin (pin 10 on most Arduino boards, 53 on the Mega). Note that even if you use a different chip select pin, the hardware SS pin must be kept as an output or the SD library functions will not work.


語法

SD.begin() SD.begin(cspin)


參數

cspin (optional): the pin connected to the chip select line of the SD card; defaults to the hardware SS line of the SPI bus


返回值

true on success; false on failure


返回SD庫

返回Arduino庫菜單

返回首頁

更多建議和問題歡迎反饋至 YFRobot論壇