ESP8266 WiFi

WiFi类

The WiFi class initializes the ethernet library and network settings.

- WiFi.mode()

设置wifi模块工作模式WIFI_AP,WIFI_STA,WIFI_AP_STA

Wifi AP - WiFi.softAP(ssid,[password],[channel],[ssid_hidden]) 设置AP模式参数 参数 ssid：网络名称（最长63字符） password：密码，至少8个字符，NULL为开放网络（可选参数） channel：通道号，1 - 13（可选参数，缺省情况下为1） ssid_hidden：网络是否可见，0为可见网络，1为隐藏网络（可选参数，缺省情况下为0） 返回值：bool - WiFi.softAPConfig(local_ip,gateway,subnet) 配置AP 参数 local_ip：ap ip(类型：IPAddress-例192,168,0,1) gateway：网关ip(类型：IPAddress) subnet：子网掩码(类型：IPAddress) 返回值：bool - WiFi.softAPdisconnect(wifioff) 断开网络，关闭AP - WiFi.softAPgetStationNum() Get the count of the Station / client that are connected to the softAP interface - WiFi.softAPIP() 获取IP地址，用于AP模式 返回IP地址 - WiFi.softAPmacAddress(mac) 获取MAC地址，用于AP模式 返回：uint8_t* - WiFi.softAPmacAddress(void) 获取MAC地址，用于AP模式 返回：String

Wifi STA WL_CONNECTED WL_NO_SSID_AVAIL; WL_CONNECT_FAILED; WL_IDLE_STATUS; WL_DISCONNECTED; - WiFi.begin() 开始wifi连接 - WiFi.config(local_ip, gateway, subnet, dns1, dns2) Change IP configuration settings disabling the dhcp client 参数 local_ip Static ip configuration gateway Static gateway configuration subnet Static Subnet mask dns1 Static DNS server 1 dns2 Static DNS server 2 返回：bool - WiFi.reconnect() will force a disconnect and then start reconnecting to AP 返回：bool - WiFi.disconnect(bool wifioff) Disconnect from the network 返回：bool - WiFi.isConnected() 检查是否已连接 返回：bool - WiFi.setAutoConnect(bool autoConnect) 设置是否复位自动连接，默认自动连接 返回：bool - WiFi.setAutoConnect() 检查是否设置了复位自动连接 返回：bool - WiFi.setAutoReconnect(bool autoReconnect) 设置当连接断开时是否重新连接 返回：bool - WiFi.waitForConnectResult() Wait for WiFi connection to reach a result returns the status reached or disconnect if STA is off 返回：连接状态 WL_CONNECTED WL_NO_SSID_AVAIL; WL_CONNECT_FAILED; WL_IDLE_STATUS; WL_DISCONNECTED; - WiFi.localIP() 获取IP地址，用于STA模式 返回：IPAddress - WiFi.macAddress(uint8_t* mac) 获取MAC地址，用于STA模式 - WiFi.macAddress(void) 获取MAC地址，用于STA模式 - WiFi.subnetMask() Get the interface subnet mask address. 返回：IPAddress - WiFi.gatewayIP() Get the gateway ip address. 返回：IPAddress - begin() - disconnect() - config() - setDNS() - SSID() - BSSID() - RSSID() - encryptionType() - scanNetworks() - status() - getSocket() - macAddress()

Server 类 The Server class creates servers which can send data to and receive data from connected clients (programs running on other computers or devices). - Server - WiFiServer - begin() - available() - write() - print() - println() Client 类 The client class creates clients that can connect to servers and send and receive data. - Client - WiFiClient() - connected() - connect() - write() - print() - println() - available() - read() - flush() - stop() UDP 类 The UDP class enables UDP message to be sent and received. -WiFiUDP -begin() -available() -beginPacket() -endPacket() -write() -parsePacket() -peek() -read() -flush() -stop() -remoteIP() -remotePort()

---

返回ESP8266 Libraries

返回首页

更多建议和问题欢迎反馈至 YFRobot论坛