ESP8266 WiFi

来自YFRobotwiki
2016年3月25日 (五) 10:56Admin讨论 | 贡献的版本

(差异) ←上一版本 | 最后版本 (差异) | 下一版本→ (差异)
跳转至: 导航搜索

WiFi类

The WiFi class initializes the ethernet library and network settings.

- WiFi.mode()

设置wifi模块工作模式WIFI_AP,WIFI_STA,WIFI_AP_STA

Wifi AP


- WiFi.softAP(ssid,[password],[channel],[ssid_hidden])

设置AP模式参数
参数
ssid:网络名称(最长63字符)
password:密码,至少8个字符,NULL为开放网络(可选参数)
channel:通道号,1 - 13(可选参数,缺省情况下为1)
ssid_hidden:网络是否可见,0为可见网络,1为隐藏网络(可选参数,缺省情况下为0)
返回值:bool

- WiFi.softAPConfig(local_ip,gateway,subnet)

配置AP
参数
local_ip:ap ip(类型:IPAddress-例192,168,0,1)
gateway:网关ip(类型:IPAddress)
subnet:子网掩码(类型:IPAddress)
返回值:bool

- WiFi.softAPdisconnect(wifioff)

断开网络,关闭AP

- WiFi.softAPgetStationNum()

Get the count of the Station / client that are connected to the softAP interface

- WiFi.softAPIP()

获取IP地址,用于AP模式
返回IP地址

- WiFi.softAPmacAddress(mac)

获取MAC地址,用于AP模式
返回:uint8_t*

- WiFi.softAPmacAddress(void)

获取MAC地址,用于AP模式
返回:String

Wifi STA


WL_CONNECTED WL_NO_SSID_AVAIL; WL_CONNECT_FAILED; WL_IDLE_STATUS; WL_DISCONNECTED;

- WiFi.begin()

开始wifi连接

- WiFi.config(local_ip, gateway, subnet, dns1, dns2)

Change IP configuration settings disabling the dhcp client
参数
local_ip Static ip configuration
gateway Static gateway configuration
subnet Static Subnet mask
dns1 Static DNS server 1
dns2 Static DNS server 2
返回:bool

- WiFi.reconnect()

will force a disconnect and then start reconnecting to AP
返回:bool

- WiFi.disconnect(bool wifioff)

Disconnect from the network
返回:bool

- WiFi.isConnected()

检查是否已连接
返回:bool

- WiFi.setAutoConnect(bool autoConnect)

设置是否复位自动连接,默认自动连接
返回:bool

- WiFi.setAutoConnect()

检查是否设置了复位自动连接
返回:bool

- WiFi.setAutoReconnect(bool autoReconnect)

设置当连接断开时是否重新连接
返回:bool

- WiFi.waitForConnectResult(bool autoReconnect)

Wait for WiFi connection to reach a resultreturns the status reached or disconnect if STA is off
返回:连接状态
WL_CONNECTED
WL_NO_SSID_AVAIL;
WL_CONNECT_FAILED;
WL_IDLE_STATUS;
WL_DISCONNECTED;

- WiFi.localIP()

设置IP地址,用于STA模式

- WiFi.softAP(ssid,password)

设置一个WPA2-PSK的网络(密码至少8个字符)

- WiFi.softAP(ssid,password)

设置一个WPA2-PSK的网络(密码至少8个字符)

- WiFi.softAP(ssid,password)

设置一个WPA2-PSK的网络(密码至少8个字符)
- begin()
- disconnect()
- config()
- setDNS()
- SSID()
- BSSID()
- RSSID()
- encryptionType()
- scanNetworks()
- status()
- getSocket()
- macAddress()


Server 类

The Server class creates servers which can send data to and receive data from connected clients (programs running on other computers or devices).

- Server
- WiFiServer
- begin()
- available()
- write()
- print()
- println()


Client 类

The client class creates clients that can connect to servers and send and receive data.

- Client
- WiFiClient()
- connected()
- connect()
- write()
- print()
- println()
- available()
- read()
- flush()
- stop()



UDP 类

The UDP class enables UDP message to be sent and received.

-WiFiUDP
-begin()
-available()
-beginPacket()
-endPacket()
-write()
-parsePacket()
-peek()
-read()
-flush()
-stop()
-remoteIP()
-remotePort()




返回Arduino库菜单

返回首页

更多建议和问题欢迎反馈至 YFRobot论坛