|
|
第 127 行: |
第 127 行: |
| ::返回:DS3231AlarmTwo | | ::返回:DS3231AlarmTwo |
| | | |
− | :-<font color="forestgreen">LatchAlarmsTriggeredFlags()</font> -- 获取闹钟2 | + | :-<font color="forestgreen">LatchAlarmsTriggeredFlags()</font> -- 警报后必须调用,否则将不会再次触发 |
| ::参数:无 | | ::参数:无 |
− | ::返回 :DS3231AlarmTwo | + | ::返回 :DS3231AlarmFlag |
− | | + | |
− | :-[[RtcDS3231.LatchAlarmsTriggeredFlags()| LatchAlarmsTriggeredFlags()]]
| + | |
− | | + | |
− | :-[[RtcDS3231.ForceTemperatureCompensationUpdate()| ForceTemperatureCompensationUpdate()]]
| + | |
| | | |
| + | :-<font color="forestgreen">ForceTemperatureCompensationUpdate()</font> -- 手动温度补偿更新 |
| + | ::参数:bool block |
| + | ::返回:无 |
| | | |
| :-<font color="forestgreen">GetAgingOffset()</font> -- 获取老化补偿 | | :-<font color="forestgreen">GetAgingOffset()</font> -- 获取老化补偿 |
2016年11月18日 (五) 13:44的修訂版本
RTC_DS1307_DS3231庫 -- arduino實時時鐘庫(已支持ESP8266)
GITHUB 工程地址:RTC by Makuna
支持設備
DS1307
Full support including squarewave output pin and memory access -- 全部功能支持,包括方波輸出和內存訪問
DS3231
Full support including squarewave output pin and alarms. -- 全部功能支持,包括方波輸出和鬧鐘
示例
- - DS1307_Memory: This demonstrates how to write and read data from the extended memory of the device. This memory is retained even after the device has lost power./演示如何讀寫數據從設備的擴展內存。即使設備掉電內存依然保存
- - DS1307_Simple: This demonstrates how to set and get the date and time from the device./演示了如何在設備上設置和獲取日期和時間
- - DS3231_Alarms: This demonstrates how to set the alarms and check when the alarms are triggered. This includes using the squarewave output to trigger an interrupt./演示如何設置鬧鐘和檢查何時觸發鬧鐘。這包含使用方波輸出觸發一個中斷
- - DS3231_Simple: This demonstrates how to set and get the date and time from the device./演示如何在設備上設置和獲取日期和時間。
- - DS3231_StoreIt: This demonstrates how to turn off the Rtc clock so that the onboard battery will last longer./演示如何關閉RTC時鐘以保證板載電池能持續更長時間
|
|
DS1307
DS1307 函數。
- - Begin() -- 初始化
- 參數:無
- 返回:無
- - GetIsRunning()
- - SetIsRunning()
- - SetDateTime()
- - GetDateTime()
- - SetMemory()
- - GetMemory()
- - SetSquareWavePin()
DS3231
DS3231 函數
- - Begin() -- 初始化
- 參數:無
- 返回:無
- -IsDateTimeValid() -- 檢查日期時間是否有效
- 參數:無
- 返回:bool
- - GetIsRunning()
- - SetIsRunning()
- -SetDateTime() -- 設置日期時間
- 參數:const RtcDateTime& dt
- 返回:無
- -GetDateTime() -- 獲取日期時間
- 參數:無
- 返回:RtcDateTime
- -GetTemperature() -- 獲取溫度
- 參數:無
- 返回:RtcTemperature
- -Enable32kHzPin() -- 使能32KHZ引腳
- 參數:bool enable
- 返回:無
- -SetSquareWavePin() -- 設置方波輸出引腳
- 參數:DS3231SquareWavePinMode pinMode
enum DS3231SquareWavePinMode{
DS3231SquareWavePin_ModeNone,
DS3231SquareWavePin_ModeBatteryBackup,
DS3231SquareWavePin_ModeClock,
DS3231SquareWavePin_ModeAlarmOne,
DS3231SquareWavePin_ModeAlarmTwo,
DS3231SquareWavePin_ModeAlarmBoth
}
- 返回:無
- -SetSquareWavePinClockFrequency() -- 設置方波輸出引腳時鐘頻率
- 參數:DS3231SquareWaveClock freq
- 返回:無
- -SetAlarmOne() -- 設置鬧鐘1
- 參數:const DS3231AlarmOne& alarm
- 返回:無
- -SetAlarmTwo() -- 設置鬧鐘2
- 參數:const DS3231AlarmOne& alarm
- 返回:無
- -GetAlarmOne() -- 獲取鬧鐘1
- 參數:無
- 返回:DS3231AlarmOne
- -GetAlarmTwo() -- 獲取鬧鐘2
- 參數:無
- 返回:DS3231AlarmTwo
- -LatchAlarmsTriggeredFlags() -- 警報後必須調用,否則將不會再次觸發
- 參數:無
- 返回:DS3231AlarmFlag
- -ForceTemperatureCompensationUpdate() -- 手動溫度補償更新
- 參數:bool block
- 返回:無
- -GetAgingOffset() -- 獲取老化補償
- 參數:無
- 返回:int8_t
- -SetAgingOffset() -- 設置老化補償
- 參數:int8_t
- 返回:無
|
|
TIP: 宏:__DATE__,__TIME__,__FILE__,__LINE__
返回DS1307
返回DS3231
返回Arduino庫菜單
返回首頁
更多建議和問題歡迎反饋至 YFRobot論壇