YFROBOT创客社区

标题: arduino IIC地址查询查询/I2C地址扫描查询 Arduino I2C Scanner [打印本页]

作者: AllBlue    时间: 2018-5-18 14:18
标题: arduino IIC地址查询查询/I2C地址扫描查询 Arduino I2C Scanner
Arduino I2C Scanner
IIC液晶使用贴中,我们的网友:hwn444 贡献的IIC地址查询程序,这里我们再放一个IIC地址扫描程序,功能都一样,就是在串口输出时做了些事情。。。
废话少说直接看程序:
[C] 纯文本查看 复制代码
/**
   Arduino I2C Scanner
   v. 1.0
   Copyright (C) 2017 Robert Ulbricht
   http://www.arduinoslovakia.eu
   I2C Scanner inspired by Raspberry Pi.
   IDE: 1.8.3 or higher
   Board: Arduino Uno, Mega, Pro Mini
   This program is free software: you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.
   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#include <Wire.h>

void setup() {
  Wire.begin();

  Serial.begin(115200);
  Serial.println("I2C Scanner");

}

void loop() {
  uint8_t error, address, line = 1;
  int nDevices = 0;

  Serial.println("     0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F");
  Serial.print  ("00:         ");

  // https://learn.adafruit.com/i2c-addresses/the-list
  for (address = 0x03; address < 0x78; address++ ) {
    // The i2c_scanner uses the return value of
    // the Write.endTransmisstion to see if
    // a device did acknowledge to the address.
    Wire.beginTransmission(address);
    error = Wire.endTransmission();

    if (error == 0) {
      printHex(address);
      nDevices++;
    }
    else if (error == 4)
      Serial.print(" ER");
    else
      Serial.print(" --");

    if ((address + 1) % 16 == 0) {
      Serial.println();
      Serial.print(line);
      Serial.print("0:");
      line++;
    }

  }
  if (nDevices == 0)
    Serial.println("\nNo I2C devices found\n");
  else {
    Serial.print("\nFound ");
    Serial.print(nDevices);
    Serial.println(" devices\n");
  }

  delay(5000);           // wait 5 seconds for next scan
}

void printHex(uint8_t address) {
  Serial.print(" ");
  if (address < 16)
    Serial.print("0");
  Serial.print(address, HEX);
}



输出效果(图中硬件IIC 地址为 0x68):
[attach]1935[/attach]


程序下载:
[attach]1937[/attach]








欢迎光临 YFROBOT创客社区 (http://yfrobot.com.cn/) Powered by Discuz! X3.1